Tamiya 1/10 1990 Land Rover Defender 90 4WD EP Scale Truck Kit CC-02
- SKU:
- 58700
- Brand:
- Tamiya
Land Rover Legend
Loved by millions across the world for its superb 4WD performance and distincive functional form, the Land Rover Defender had a long production run from 1948 until 2016. This R/C model assembly kit recreates the short wheelbase Defender 90 variant from 1990, with the unmistakeable form captured by a polycarbonate body featuring front and rear light cases which are compatible with separately sold LEDs. Separate molded parts are included to depict features such as the outer roll cage, front grille and spare tyre cover. The CC-02 chassis is a great base, providing a sure-footed drive whether on-road or off.
CC-02 Chassis
Designed for a wide range of off-road environments, including rocky terrain, the CC-02 chassis' ladder frame is inspired by full-size vehicles and is the base for its superior durability. A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Four-link rigid suspension is employed front and rear, with CVA oil dampers for all-encompassing control, even on tricky rock sections. This model comes with red wheels and grippy block pattern tires.
Key Features:
- Polycarbonate body
- Compatible with 5mm-diameter LEDs x2 for headlights and 5mm-diameter LEDs x6 for the rear
- Includes separately molded parts for grille, side mirrors, light cases and outer roll gages
- Black ABS resin wheels are paired with semi-pneumatic all-terrain rubber tires
- The ladder frame CC-02 chassis features superior durability and employs front/rear coil spring suspension which is great for off-road surfaces including rocky terrain
- Includes 540 Type brushed motor
- A wide range of Hop-Up Option Parts is available to customize the CC-02 chassis
What's In The Box?
- Tamiya 1/10 1990 Land Rover Defender 90 4WD Scale Truck Kit
- Polycarbonate Body Shell
- Decal Sheet
- Instruction Manual
Required for Operation (Not Included)
- Electronic Speed Controller
- 2-channel radio
- Steering servo
- 7.2-7.4volt battery pack
- Compatible charger
A highly capable off-road drive awaits, with shaft-driven 4WD and front/rear 4-link rigid suspension setups on the CC-02 chassis.
Axle housings are molded in reinforced plastic, and house 3-bevel differentials. They can be locked when running on lower-grip surfaces
Take a look at the model from the rear, with the timeless, squared-off lines of the Defender 90 expertly depicted by a polycarbonate body.
Separate injection molded parts in the kit include the barred front grille, which adds another layer of detail to this classic body.
Tough polycarbonate-ABS components are used to create the outer roll bar, a big part of the model's off-road look.
Six-spoke wheels molded in black plastic lend the model a highly realistic look, and are paired with capable block pattern tires.
For those who want even more realism, the model headlights can be paired with separately sold LEDs to light up the Defender!
Technical Specifications:
Length: 429mm
Width: 200mm
Height: 215mm
Wheelbase: 242mm
Tread: 160mm (Front), 163mm (Rear)
Tyre Width/Diameter: 33/90mm (Front & Rear)
Ladder Frame
Longitudinal Motor, Shaft-Driven 4WD
3-Bevel Differential Gears
4-Link Rigid Suspension (Front & Rear)
Gear Ratio = 17.33:1 (using kit-standard 16T pinion)
Type 540 Motor
Shipping
$13.50 Flat Rate - Nationwide!
Saturday Delivery
Unfortunately Saturday delivery is no longer available at RC Hobbies.
Delivery
Once RC Hobbies has confirmed acceptance of the buyer's order, we will endeavor to dispatch the buyer's order within
1-3 Business days unless a different time frame is specified in relation to a particular product. If we are unable to dispatch
the buyer's order within the time frame specified by RC Hobbies we will endeavor to contact the buyer and advise
the buyer of the expected dispatch date.
In stock items are generally dispatched on the same day you place your order, unless a different time frame is specified
in relation to a particular product and provided the order was placed before our daily cut off time which is usually
around 1PM.
We use NZ Post, Aramex, and Post Haste for New Zealand orders. Deliveries are usually 2 working days, but please allow an extra
day for big parcels to reach the South Island and for rural deliveries.
We use NZ Post for orders that can fit into overnight courier bags and Post Haste for larger parcels.
Tracking emails will be sent out once parcels have been collected.
The buyer may specify delivery instructions for an order (for example, the buyer may authorise the delivery agent to
leave the products in a specified location if the buyer will not be at the delivery address). RC Hobbies will
not be responsible for any order that is delivered in accordance with the buyer’s delivery instructions.
Delivery to PO Boxes
RC Hobbies can send goods to PO Boxes, except for large freight boxes.
International Delivery.
We're based in New Zealand but we deliver all round the world. Please use our shipping estimator at checkoutfor a shipping quote or contact us and will send you
a quote.
sales@rchobbies.co.nz
Returns Policy
The item I received is not the item I ordered
Provided the item is unopened and in mint condition we’ll replace the item. To receive your replacement you must return the
original item to. You will be provided with a no-cost return addressed courier satchel (or similar)
and we will process your replacement within 1–3 days of receiving your item.
The item I ordered arrived faulty.
Please arrange with RC Hobbies to return the item for testing. If we confirm that the item was damaged before leaving
RC Hobbies, or was faulty out of the box, your item will be repaired or if it cannot be repaired then it will be replaced
by RC Hobbies Ltd free of charge. If the goods are faulty we will meet our obligations under the Consumers Guarantees
Act to provide a remedy.
The item I ordered did not arrive
If your item did not arrive the first thing to do is request a “track and trace” on your item from the Courier Post or Fastway
tracking emails we send out.
Alternatively you can call Courier Post on
0800 268 743 or Post Haste on
09 444 2950
If the “track and trace” on your order indicates that it has been delivered, but you’re unable to find it or it hasn’t been
delivered within the timeframe we will start an investigation with Courier Post & Post Haste on your behalf.
Regrettably, neither RC Hobbies nor Courier Post & Fastway are able to refund or replace items that have been lost, damaged
or stolen after being delivered to your property. If you are concerned about leaving your items unattended we recommend
using “Signature Required” option which is our default option unless advise by the Buyer to use the “No Signature Required”
option.
I've changed my mind and no longer want the item I ordered
Change of mind returns can be processed as long as it has been agreed by RC Hobbies and the item has been returned
within 7 days of dispatch and is unopened and in mint condition. The shipping for the return will also be at the cost
of the buyer. Once we have the item in hand we will assess the item and if everything checks out OK you will receive
a Store Credit or refund less the restock fee and freight charges.
Restock fee
All goods ordered in error by the Customer or goods the Customer wishes to return are subject to a restock fee. The fee is
15% of the goods sales value. This applies if you change your mind, ordered it in error, unwanted Gift or just did not
like it or did not suit you, so please choose carefully and read the descriptions in the listings as some products also
require additional items to complete.
Description
Land Rover Legend
Loved by millions across the world for its superb 4WD performance and distincive functional form, the Land Rover Defender had a long production run from 1948 until 2016. This R/C model assembly kit recreates the short wheelbase Defender 90 variant from 1990, with the unmistakeable form captured by a polycarbonate body featuring front and rear light cases which are compatible with separately sold LEDs. Separate molded parts are included to depict features such as the outer roll cage, front grille and spare tyre cover. The CC-02 chassis is a great base, providing a sure-footed drive whether on-road or off.
CC-02 Chassis
Designed for a wide range of off-road environments, including rocky terrain, the CC-02 chassis' ladder frame is inspired by full-size vehicles and is the base for its superior durability. A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Four-link rigid suspension is employed front and rear, with CVA oil dampers for all-encompassing control, even on tricky rock sections. This model comes with red wheels and grippy block pattern tires.
Key Features:
- Polycarbonate body
- Compatible with 5mm-diameter LEDs x2 for headlights and 5mm-diameter LEDs x6 for the rear
- Includes separately molded parts for grille, side mirrors, light cases and outer roll gages
- Black ABS resin wheels are paired with semi-pneumatic all-terrain rubber tires
- The ladder frame CC-02 chassis features superior durability and employs front/rear coil spring suspension which is great for off-road surfaces including rocky terrain
- Includes 540 Type brushed motor
- A wide range of Hop-Up Option Parts is available to customize the CC-02 chassis
What's In The Box?
- Tamiya 1/10 1990 Land Rover Defender 90 4WD Scale Truck Kit
- Polycarbonate Body Shell
- Decal Sheet
- Instruction Manual
Required for Operation (Not Included)
- Electronic Speed Controller
- 2-channel radio
- Steering servo
- 7.2-7.4volt battery pack
- Compatible charger
A highly capable off-road drive awaits, with shaft-driven 4WD and front/rear 4-link rigid suspension setups on the CC-02 chassis.
Axle housings are molded in reinforced plastic, and house 3-bevel differentials. They can be locked when running on lower-grip surfaces
Take a look at the model from the rear, with the timeless, squared-off lines of the Defender 90 expertly depicted by a polycarbonate body.
Separate injection molded parts in the kit include the barred front grille, which adds another layer of detail to this classic body.
Tough polycarbonate-ABS components are used to create the outer roll bar, a big part of the model's off-road look.
Six-spoke wheels molded in black plastic lend the model a highly realistic look, and are paired with capable block pattern tires.
For those who want even more realism, the model headlights can be paired with separately sold LEDs to light up the Defender!
Technical Specifications:
Length: 429mm
Width: 200mm
Height: 215mm
Wheelbase: 242mm
Tread: 160mm (Front), 163mm (Rear)
Tyre Width/Diameter: 33/90mm (Front & Rear)
Ladder Frame
Longitudinal Motor, Shaft-Driven 4WD
3-Bevel Differential Gears
4-Link Rigid Suspension (Front & Rear)
Gear Ratio = 17.33:1 (using kit-standard 16T pinion)
Type 540 Motor
Videos
0 Reviews
Shipping & Returns
Shipping
$13.50 Flat Rate -Nationwide!
Delivery
Once E&E TRADERS LTD has confirmed acceptance of the buyer's order, we will endeavor to dispatch the buyer's order within
24 Hours unless a different time frame is specified in relation to a particular product. If we are unable to dispatch
the buyer's order within the time frame specified by E&E TRADERS LTD we will endeavor to contact the buyer and advise
the buyer of the expected dispatch date.
In stock items are generally dispatched on the following business day, unless a different time frame is specified
in relation to a particular product and provided the order was placed before our daily cut off time which is usually
around 1PM - 2PM.
We use Courier Post and Fastway for New Zealand orders. Deliveries are usually overnight, but please allow an extra
day for big parcels to reach the South Island and for rural deliveries.
We use Courier Post for orders that can fit into overnight courier bags and Fastway for larger parcels.
Tracking emails will be sent out once parcels have been collected.
The buyer may specify delivery instructions for an order (for example, the buyer may authorise the delivery agent to
leave the products in a specified location if the buyer will not be at the delivery address). RC Hobbies 12 Ltd will
not be responsible for any order that is delivered in accordance with the buyer’s delivery instructions.
Delivery to PO Boxes
E & E TRADERS LTD can send goods to PO Boxes
International Delivery.
We're based in New Zealand but we deliver all round the world. Please contact us for a shipping quote or we will send you
a quote after your order has been placed.
sales@rchobbies.co.nz
Returns Policy
The item I received is not the item I ordered
Provided the item is unopened and in mint condition we’ll replace the item. To receive your replacement you must return the
original item to E & E TRADERS LTD. You will be provided with a no-cost return addressed courier satchel (or similar) and
we will process your replacement within 1–3 days of receiving your item.
The item I ordered arrived faulty.
Please arrange with E & E TRADERS LTD to return the item for testing. If we confirm that the item was damaged before leaving
RC Hobbies, or was faulty out of the box, your item will be repaired or if it cannot be repaired then it will be replaced
by E & E TRADERS LTD free of charge. If the goods are faulty we will meet our obligations under the Consumers Guarantees
Act to provide a remedy.
The item I ordered did not arrive
If your item did not arrive the first thing to do is request a “track and trace” on your item from the Courier Post or Fastway tracking emails we send out.
Alternatively you can call Courier Post on 0800 268 743 or Fastway on 09 634 3704
If the “track and trace” on your order indicates that it has been delivered, but you’re unable to find it or it hasn’t been
delivered within the timeframe we will start an investigation with Courier Post & PostHaste on your behalf.
Regrettably, neither RC Hobbies nor Courier Post & PostHaste are able to refund or replace items that have been lost, damaged or stolen
after being delivered to your property. If you are concerned about leaving your items unattended we recommend using “Signature
Required” option which is our default option unless advise by the Buyer to use the “No Signature Required” option.
I've changed my mind and no longer want the item I ordered
Change of mind returns can be processed as long as it has been agreed by E & E TRADERS LTD and the item has been returned
within 7 days of dispatch and is unopened and in mint condition. The shipping for the return will also be at the cost of
the buyer. Once we have the item in hand we will assess the item and if everything checks out OK you will receive a Store
Credit or refund less the restock fee and freight charges.
Restock fee
All goods ordered in error by the Customer or goods the Customer wishes to return are subject to a restock fee. The fee is
10% of the goods sales value. This applies if you change your mind, ordered it in error, unwanted Gift or just did not like
it or did not suit you, so please choose carefully and read the descriptions in the listings as some products also require
additional items to complete.
Related Products
Tamiya 1/10 Toyota Land Cruiser 300 CC-02 EP Kit
58688Since the first generation model release in 1951, the Toyota Land Cruiser has been one of the most famous 4WD vehicles in the world. This R/C model assembly kit recreates the Land Cruiser 300 series...
Tamiya 1/10 Landfreeder Quadtrack TT-02FT 4WD Truck Kit
58690The Tamiya Landfreeder Quadtrack is a unique twist in the world of Tamiya trucks. This kit uses a variant of the TT-02 chassis with three-sided track units instead of wheels. The result is awesome...