THE MICRO-SIZED MIKE PATEY STOL MONSTER
Mike Patey's undeniable passion, exceptional drive, and work ethic (Back to Work™) have led to him designing and building some of the most unique and incredible aircraft – while his infectious enthusiasm has inspired thousands of people to enjoy RC and full-scale aviation along the way! Starting with a Wilga 2000 and replacing its Lycoming O-540 piston engine with a Pratt & Whitney PT6A-28 turboprop boasting about twice the power at half the weight, then many additional modifications later, Mike proudly unveiled his “ultimate bush plane.” It could go to the same places as a Carbon Cub but climb twice as fast, reach altitudes up to 28,000 feet, and cruise cross-country at 180 MPH while carrying four people plus gear. Changes from the Wilga were so extensive that the FAA approved Mike's redesign as an experimental exhibition aircraft. The E-flite DRACO 2.0m was equally unique and astounding, and since its release, it's become one of the best-selling RC aircraft ever! But many pilots have asked for a smaller version that's more convenient, easier to fly, and most importantly–is more affordable too. The Micro DRACO 800mm delivers in every way to offer the most practical and fun-to-fly replica for intermediate to experienced pilots yet!
Key Features:
- The most affordable, convenient, practical, and easiest to fly DRACO model yet
- Micro-sized and uniquely capable so it can be flown in more places and smaller spaces
- An officially licensed scale replica of Mike Patey's one-of-a-kind and ultimate bush plane
- Functional scale features including flaps and LED navigation, landing, down, and other lights
- Scale details including molded-in surface features, steps, antennas, wingtip skids, and much more
- Factory-installed 3S and 4S 300mAh battery-compatible brushless outrunner motor with 4-blade prop
- Spektrum receiver and ESC provide real-time battery voltage, current draw, motor RPM, and other data via compatible transmitters
- Easier to fly with innovative and optional-use SAFE® Select flight envelope protection
- The unmatched stability and locked-in feel of exclusive AS3X® technology
- Five factory-installed servos with strong and precise ball-link equipped linkages
- Large and convenient, magnetically-secured top hatch with a large battery compartment
- Steerable tailwheel plus oversized tires for the ability to taxi, take off, and land on a variety of surfaces
- Factory-finished in a fully painted with decal trim scheme and nearly ready to fly right out of the box
- Quick and easy to install/remove one-piece wing for even more convenient storage and transport
- No FAA registration or remote ID is required (under the 250-gram weight limit)
What's In The Box?
- (1) E-flite Micro DRACO 800mm with:
- (5) Spektrum Linear Servos (installed)
- (1) Spektrum Brushless Outrunner Motor (installed)
- (1) Spektrum Control Unit with Receiver and Brushless ESC (installed)
- (1) Product Manual
Required for Operation (Not Included)
- Full-range 6+ channel Spektrum DSMX/DSM2 compatible transmitter
- 3S 11.1V or 4S 14.8V 300mAh LiPo with JST-RCY Connector
- Compatible LiPo charger
Overview
Inspired by the incredible ingenuity and effort Mike Patey put into building the full-sized aircraft, E-flite delivered the first officially licensed scale replica of his ultimate bush plane – the amazing DRACO 2.0m. Since its release, many pilots have dreamt of and asked for a scaled-down version that's more affordable, convenient, and easier to fly in more places and smaller spaces! The E-flite Micro DRACO 800mm is precisely that, and is slightly larger than UMX™ (Ultra Micro eXtreme) and other ultra-micro class models to better replicate the complex design while also including as many scale details as possible. It's still small and light enough to fly in large yards, small parks, sports fields, and beyond. Yet, it also features many surface details, including molded-in rivets, panel lines, control surface corrugation, antennas, steps, wingtip “stinger” skids, and more. Functional features include LED navigation, landing and simulated strobe lights, flaps, and a steerable tailwheel. Oversized, tundra-style tires on the sprung wire main gear with simulated KING shocks soak up bumps and provide excellent prop clearance while also making it possible to take off from and land on paved, dirt, gravel, and even the grass surfaces found at many parks and sports fields.
The high-power brushless outrunner motor can drive the scale 4-blade propeller with a 3S 300mAh battery for smooth and scale-like flight and even to perform basic aerobatics. Or you can use a 4S 300mAh battery without any modifications or upgrades for better-than-scale vertical performance and more aggressive aerobatic flying! The factory-installed Spektrum receiver and ESC deliver real-time telemetry data, including overall battery voltage, current, motor RPM, and more, to compatible AirWare™ equipped transmitters. Plus, the receiver is also equipped with exclusive and expertly-tuned AS3X so it feels like you're flying a larger model – even in some wind – along with optional-use SAFE Select technology that makes it easier to fly successfully after you've mastered flying at least one or two previous RC aircraft! Best of all, Micro DRACO arrives factory-finished with a premium, fully-painted plus decal trim scheme and mostly factory-assembled with a separate one-piece wing that can be installed or removed quickly and easily with a single screw. It all adds up to offer an authentic – yet more affordable and convenient – DRACO flying experience, including unmatched STOL (Short Take Off and Landing), scale, and beyond flight performance!
Micro DRACO is a Bind-N-Fly® (BNF) Basic aircraft that includes a Spektrum receiver equipped with industry-leading DSMX/DSM2 technology so intermediate to experienced RC pilots can use their own compatible transmitter, battery, and charger. An ULTIMATE Combo including the BNF Basic airplane, a Spektrum transmitter, Smart charger, adapter, and battery – plus a copy of the RealFlight Trainer Edition RC Flight Simulator – is also available that includes everything needed to fly and saves you more than $70 compared to purchasing all of the items separately!
Are you new to flying RC (Radio Controlled) aircraft? If you are, we recommend learning to fly with one of our purpose-built trainer aircraft, such as the HobbyZone® Carbon Cub S 2 1.3m. Based on the Carbon Cub Mike's wife, Chandra Patey, used to fly, it's equipped with exclusive and innovative SAFE technology that makes it possible for almost anyone to learn to fly successfully! The Ready-To-Fly (RTF) Basic version includes nearly everything needed to fly (except for a compatible LiPo battery and charger that are sold separately or together in a money-saving Powerstage bundle) and is a perfect choice if you're a new RC pilot.
Technical Specifications:
LiPo Compatibility | 3S, 4S |
Completion Level | Bind-N-Fly Basic |
Recommended Motor Battery | 3S 300mAh to 4S 300mAh |
Approximate Assembly Time | Less than 5 minutes |
Flaps | Yes |
Material | EPS |
Power Type | Electric |
Servos | Included |
Skill Level | Level 2 |
Trim Scheme Colors | Red |
Wingspan | 31.1" (790 mm) |
Motor Type | Brushless |
Speed Control | Included |
Battery | Sold Separately |
Connector Type | JST-RCY |
Product Length | 19.4" (493 mm) |
Lighted | Nav Lights |
Technology | AS3X, SAFE Select |
Charger | Sold Separately |
Receiver | Included |
Product Weight | Without Battery: 7.27 oz (206g) | With Recommended 4S 300mAh Battery: 8.43oz (239g) |
Shipping
$13.50 Flat Rate - Nationwide!
Saturday Delivery
Unfortunately Saturday delivery is no longer available at RC Hobbies.
Delivery
Once RC Hobbies has confirmed acceptance of the buyer's order, we will endeavor to dispatch the buyer's order within
1-3 Business days unless a different time frame is specified in relation to a particular product. If we are unable to dispatch
the buyer's order within the time frame specified by RC Hobbies we will endeavor to contact the buyer and advise
the buyer of the expected dispatch date.
In stock items are generally dispatched on the same day you place your order, unless a different time frame is specified
in relation to a particular product and provided the order was placed before our daily cut off time which is usually
around 1PM.
We use NZ Post, Aramex, and Post Haste for New Zealand orders. Deliveries are usually 2 working days, but please allow an extra
day for big parcels to reach the South Island and for rural deliveries.
We use NZ Post for orders that can fit into overnight courier bags and Post Haste for larger parcels.
Tracking emails will be sent out once parcels have been collected.
The buyer may specify delivery instructions for an order (for example, the buyer may authorise the delivery agent to
leave the products in a specified location if the buyer will not be at the delivery address). RC Hobbies will
not be responsible for any order that is delivered in accordance with the buyer’s delivery instructions.
Delivery to PO Boxes
RC Hobbies can send goods to PO Boxes, except for large freight boxes.
International Delivery.
We're based in New Zealand but we deliver all round the world. Please use our shipping estimator at checkoutfor a shipping quote or contact us and will send you
a quote.
sales@rchobbies.co.nz
Returns Policy
The item I received is not the item I ordered
Provided the item is unopened and in mint condition we’ll replace the item. To receive your replacement you must return the
original item to. You will be provided with a no-cost return addressed courier satchel (or similar)
and we will process your replacement within 1–3 days of receiving your item.
The item I ordered arrived faulty.
Please arrange with RC Hobbies to return the item for testing. If we confirm that the item was damaged before leaving
RC Hobbies, or was faulty out of the box, your item will be repaired or if it cannot be repaired then it will be replaced
by RC Hobbies Ltd free of charge. If the goods are faulty we will meet our obligations under the Consumers Guarantees
Act to provide a remedy.
The item I ordered did not arrive
If your item did not arrive the first thing to do is request a “track and trace” on your item from the Courier Post or Fastway
tracking emails we send out.
Alternatively you can call Courier Post on
0800 268 743 or Post Haste on
09 444 2950
If the “track and trace” on your order indicates that it has been delivered, but you’re unable to find it or it hasn’t been
delivered within the timeframe we will start an investigation with Courier Post & Post Haste on your behalf.
Regrettably, neither RC Hobbies nor Courier Post & Fastway are able to refund or replace items that have been lost, damaged
or stolen after being delivered to your property. If you are concerned about leaving your items unattended we recommend
using “Signature Required” option which is our default option unless advise by the Buyer to use the “No Signature Required”
option.
I've changed my mind and no longer want the item I ordered
Change of mind returns can be processed as long as it has been agreed by RC Hobbies and the item has been returned
within 7 days of dispatch and is unopened and in mint condition. The shipping for the return will also be at the cost
of the buyer. Once we have the item in hand we will assess the item and if everything checks out OK you will receive
a Store Credit or refund less the restock fee and freight charges.
Restock fee
All goods ordered in error by the Customer or goods the Customer wishes to return are subject to a restock fee. The fee is
15% of the goods sales value. This applies if you change your mind, ordered it in error, unwanted Gift or just did not
like it or did not suit you, so please choose carefully and read the descriptions in the listings as some products also
require additional items to complete.
Description
THE MICRO-SIZED MIKE PATEY STOL MONSTER
Mike Patey's undeniable passion, exceptional drive, and work ethic (Back to Work™) have led to him designing and building some of the most unique and incredible aircraft – while his infectious enthusiasm has inspired thousands of people to enjoy RC and full-scale aviation along the way! Starting with a Wilga 2000 and replacing its Lycoming O-540 piston engine with a Pratt & Whitney PT6A-28 turboprop boasting about twice the power at half the weight, then many additional modifications later, Mike proudly unveiled his “ultimate bush plane.” It could go to the same places as a Carbon Cub but climb twice as fast, reach altitudes up to 28,000 feet, and cruise cross-country at 180 MPH while carrying four people plus gear. Changes from the Wilga were so extensive that the FAA approved Mike's redesign as an experimental exhibition aircraft. The E-flite DRACO 2.0m was equally unique and astounding, and since its release, it's become one of the best-selling RC aircraft ever! But many pilots have asked for a smaller version that's more convenient, easier to fly, and most importantly–is more affordable too. The Micro DRACO 800mm delivers in every way to offer the most practical and fun-to-fly replica for intermediate to experienced pilots yet!
Key Features:
- The most affordable, convenient, practical, and easiest to fly DRACO model yet
- Micro-sized and uniquely capable so it can be flown in more places and smaller spaces
- An officially licensed scale replica of Mike Patey's one-of-a-kind and ultimate bush plane
- Functional scale features including flaps and LED navigation, landing, down, and other lights
- Scale details including molded-in surface features, steps, antennas, wingtip skids, and much more
- Factory-installed 3S and 4S 300mAh battery-compatible brushless outrunner motor with 4-blade prop
- Spektrum receiver and ESC provide real-time battery voltage, current draw, motor RPM, and other data via compatible transmitters
- Easier to fly with innovative and optional-use SAFE® Select flight envelope protection
- The unmatched stability and locked-in feel of exclusive AS3X® technology
- Five factory-installed servos with strong and precise ball-link equipped linkages
- Large and convenient, magnetically-secured top hatch with a large battery compartment
- Steerable tailwheel plus oversized tires for the ability to taxi, take off, and land on a variety of surfaces
- Factory-finished in a fully painted with decal trim scheme and nearly ready to fly right out of the box
- Quick and easy to install/remove one-piece wing for even more convenient storage and transport
- No FAA registration or remote ID is required (under the 250-gram weight limit)
What's In The Box?
- (1) E-flite Micro DRACO 800mm with:
- (5) Spektrum Linear Servos (installed)
- (1) Spektrum Brushless Outrunner Motor (installed)
- (1) Spektrum Control Unit with Receiver and Brushless ESC (installed)
- (1) Product Manual
Required for Operation (Not Included)
- Full-range 6+ channel Spektrum DSMX/DSM2 compatible transmitter
- 3S 11.1V or 4S 14.8V 300mAh LiPo with JST-RCY Connector
- Compatible LiPo charger
Overview
Inspired by the incredible ingenuity and effort Mike Patey put into building the full-sized aircraft, E-flite delivered the first officially licensed scale replica of his ultimate bush plane – the amazing DRACO 2.0m. Since its release, many pilots have dreamt of and asked for a scaled-down version that's more affordable, convenient, and easier to fly in more places and smaller spaces! The E-flite Micro DRACO 800mm is precisely that, and is slightly larger than UMX™ (Ultra Micro eXtreme) and other ultra-micro class models to better replicate the complex design while also including as many scale details as possible. It's still small and light enough to fly in large yards, small parks, sports fields, and beyond. Yet, it also features many surface details, including molded-in rivets, panel lines, control surface corrugation, antennas, steps, wingtip “stinger” skids, and more. Functional features include LED navigation, landing and simulated strobe lights, flaps, and a steerable tailwheel. Oversized, tundra-style tires on the sprung wire main gear with simulated KING shocks soak up bumps and provide excellent prop clearance while also making it possible to take off from and land on paved, dirt, gravel, and even the grass surfaces found at many parks and sports fields.
The high-power brushless outrunner motor can drive the scale 4-blade propeller with a 3S 300mAh battery for smooth and scale-like flight and even to perform basic aerobatics. Or you can use a 4S 300mAh battery without any modifications or upgrades for better-than-scale vertical performance and more aggressive aerobatic flying! The factory-installed Spektrum receiver and ESC deliver real-time telemetry data, including overall battery voltage, current, motor RPM, and more, to compatible AirWare™ equipped transmitters. Plus, the receiver is also equipped with exclusive and expertly-tuned AS3X so it feels like you're flying a larger model – even in some wind – along with optional-use SAFE Select technology that makes it easier to fly successfully after you've mastered flying at least one or two previous RC aircraft! Best of all, Micro DRACO arrives factory-finished with a premium, fully-painted plus decal trim scheme and mostly factory-assembled with a separate one-piece wing that can be installed or removed quickly and easily with a single screw. It all adds up to offer an authentic – yet more affordable and convenient – DRACO flying experience, including unmatched STOL (Short Take Off and Landing), scale, and beyond flight performance!
Micro DRACO is a Bind-N-Fly® (BNF) Basic aircraft that includes a Spektrum receiver equipped with industry-leading DSMX/DSM2 technology so intermediate to experienced RC pilots can use their own compatible transmitter, battery, and charger. An ULTIMATE Combo including the BNF Basic airplane, a Spektrum transmitter, Smart charger, adapter, and battery – plus a copy of the RealFlight Trainer Edition RC Flight Simulator – is also available that includes everything needed to fly and saves you more than $70 compared to purchasing all of the items separately!
Are you new to flying RC (Radio Controlled) aircraft? If you are, we recommend learning to fly with one of our purpose-built trainer aircraft, such as the HobbyZone® Carbon Cub S 2 1.3m. Based on the Carbon Cub Mike's wife, Chandra Patey, used to fly, it's equipped with exclusive and innovative SAFE technology that makes it possible for almost anyone to learn to fly successfully! The Ready-To-Fly (RTF) Basic version includes nearly everything needed to fly (except for a compatible LiPo battery and charger that are sold separately or together in a money-saving Powerstage bundle) and is a perfect choice if you're a new RC pilot.
Technical Specifications:
LiPo Compatibility | 3S, 4S |
Completion Level | Bind-N-Fly Basic |
Recommended Motor Battery | 3S 300mAh to 4S 300mAh |
Approximate Assembly Time | Less than 5 minutes |
Flaps | Yes |
Material | EPS |
Power Type | Electric |
Servos | Included |
Skill Level | Level 2 |
Trim Scheme Colors | Red |
Wingspan | 31.1" (790 mm) |
Motor Type | Brushless |
Speed Control | Included |
Battery | Sold Separately |
Connector Type | JST-RCY |
Product Length | 19.4" (493 mm) |
Lighted | Nav Lights |
Technology | AS3X, SAFE Select |
Charger | Sold Separately |
Receiver | Included |
Product Weight | Without Battery: 7.27 oz (206g) | With Recommended 4S 300mAh Battery: 8.43oz (239g) |
Videos
0 Reviews
Shipping & Returns
Shipping
$13.50 Flat Rate -Nationwide!
Delivery
Once E&E TRADERS LTD has confirmed acceptance of the buyer's order, we will endeavor to dispatch the buyer's order within
24 Hours unless a different time frame is specified in relation to a particular product. If we are unable to dispatch
the buyer's order within the time frame specified by E&E TRADERS LTD we will endeavor to contact the buyer and advise
the buyer of the expected dispatch date.
In stock items are generally dispatched on the following business day, unless a different time frame is specified
in relation to a particular product and provided the order was placed before our daily cut off time which is usually
around 1PM - 2PM.
We use Courier Post and Fastway for New Zealand orders. Deliveries are usually overnight, but please allow an extra
day for big parcels to reach the South Island and for rural deliveries.
We use Courier Post for orders that can fit into overnight courier bags and Fastway for larger parcels.
Tracking emails will be sent out once parcels have been collected.
The buyer may specify delivery instructions for an order (for example, the buyer may authorise the delivery agent to
leave the products in a specified location if the buyer will not be at the delivery address). RC Hobbies 12 Ltd will
not be responsible for any order that is delivered in accordance with the buyer’s delivery instructions.
Delivery to PO Boxes
E & E TRADERS LTD can send goods to PO Boxes
International Delivery.
We're based in New Zealand but we deliver all round the world. Please contact us for a shipping quote or we will send you
a quote after your order has been placed.
sales@rchobbies.co.nz
Returns Policy
The item I received is not the item I ordered
Provided the item is unopened and in mint condition we’ll replace the item. To receive your replacement you must return the
original item to E & E TRADERS LTD. You will be provided with a no-cost return addressed courier satchel (or similar) and
we will process your replacement within 1–3 days of receiving your item.
The item I ordered arrived faulty.
Please arrange with E & E TRADERS LTD to return the item for testing. If we confirm that the item was damaged before leaving
RC Hobbies, or was faulty out of the box, your item will be repaired or if it cannot be repaired then it will be replaced
by E & E TRADERS LTD free of charge. If the goods are faulty we will meet our obligations under the Consumers Guarantees
Act to provide a remedy.
The item I ordered did not arrive
If your item did not arrive the first thing to do is request a “track and trace” on your item from the Courier Post or Fastway tracking emails we send out.
Alternatively you can call Courier Post on 0800 268 743 or Fastway on 09 634 3704
If the “track and trace” on your order indicates that it has been delivered, but you’re unable to find it or it hasn’t been
delivered within the timeframe we will start an investigation with Courier Post & PostHaste on your behalf.
Regrettably, neither RC Hobbies nor Courier Post & PostHaste are able to refund or replace items that have been lost, damaged or stolen
after being delivered to your property. If you are concerned about leaving your items unattended we recommend using “Signature
Required” option which is our default option unless advise by the Buyer to use the “No Signature Required” option.
I've changed my mind and no longer want the item I ordered
Change of mind returns can be processed as long as it has been agreed by E & E TRADERS LTD and the item has been returned
within 7 days of dispatch and is unopened and in mint condition. The shipping for the return will also be at the cost of
the buyer. Once we have the item in hand we will assess the item and if everything checks out OK you will receive a Store
Credit or refund less the restock fee and freight charges.
Restock fee
All goods ordered in error by the Customer or goods the Customer wishes to return are subject to a restock fee. The fee is
10% of the goods sales value. This applies if you change your mind, ordered it in error, unwanted Gift or just did not like
it or did not suit you, so please choose carefully and read the descriptions in the listings as some products also require
additional items to complete.